AiM PDM32 With 10″ Race Icons Display GPS Data Logging Kit
The AiM PDM32 is a 32 channel advanced power distribution module designed to power a multitude of vehicle circuits, removing the need for traditional fuse boxes and relays. The 10″ TFT display with race icons features a fully configurable display with a range of layouts to choose from and a GPS Module providing easy lap timing and lap position for track mapping.
Key Features :
- 32 RGB LEDs
- Eight analogue digital inputs
- GPS lap timing (optional)
- Four digital inputs
- Data logging facility
- Two-speed inputs
- 28 High side outputs
- 4 Half-bridge outputs
Power Distribution Module
The AiM PDM32 is a 32 channel advanced power distribution module designed to power a multitude of vehicle circuits, removing the need for traditional fuse boxes and relays. It allows for a simplified wiring harness with increased reliability and control functions.
The PDM32 can receive data from the vehicle ECU and even includes a data logger and GPS Module for lap timing and track mapping. The GPS Module is available with cables from 50cm up to 4m. There is also a GPS roof version available in 2m or 4m.
PDM32 Power Outputs
The PDM32 features 28 high sided outputs and four half-bridge outputs: 4 x rated up to 20A (high power), 12 x rated up to 15A (mid-power), 12 x rated up to 10A (low power), 4 x rated up to 35A (half-bridge). Total continuous max current 120A.
Each output provides feedback to the data logger to provide vital information such as open circuits, short circuits, high/low voltage, the number of fault retires, and the time between the reties is user-definable.
All outputs can be configured as PWM’s for a soft start/stop. All of the PDM circuits can be set up and monitored via the Race Studio 3 software.
PDM32 Inputs
The PDM32 features 8 x analogue/digital inputs, 4 x digital-only inputs and 2 x speed inputs.
PDM32 Data Management
The PDM32 can receive and record data from the following sources, ECU – Over 1000 protocols available. Digital/analogue inputs. Internal nine-axis EMU. GPS – Lap time and position.
Expansion modules. Push buttons – From RIO02 (Remote Input Output module) or any commercial CAN keypad. PDM outputs – Currents and status of each channel individually. Other user-defined math channels.
Dash Display 10″ Race Icons
Key Features :
- 10″ TFT display
- Race Icons
- Six – Status LEDs
- Ten – Shift light LEDs
- Configurable display
- Range of layouts